한국분석기술연구소

HOME > 마이페이지 > Q&A

Q&A

요오드 분석방법 문의
이름 : AnApex \| 작성일 : 2008.07.28 09:20 \| 조회수 : 18035

Common inorganic iodine exists as iodide (e.g. KI), iodate(e.g.KIO3), and iodine (molecular iodine, i.e. I2). In low pH (high acidity), iodide is easily oxidized to molecular iodine (I2) by dissolved oxygen. If iodide is prepared in diluted nitric acid, the oxidation is even more significant. The memory effect is seen from molecular iodine but not from iodide or iodate. The iodide and iodate would behave like other metals in terms of memory effect. In other words, if iodate is prepared either in low pH or high pH medium, no memory effect is seen. If iodide is prepared in low pH medium (pH 2 or 3, for example), memory effect is significant, but if iodide is prepared in high pH medium (pH > 8 - 9), no memory effect. Certainly, iodine (iodide, iodate, or molecular iodine) is quite different from other metals in terms of ionization potential. In addition to the memory effect when iodide is prepared in low pH medium, the more severe problem is the different sample introduction efficiency when iodide is introduced as a "regular" solution (as iodide ion in water) and when iodide is introduced as I2 (molecular iodine in water). This is something like a hydride generation (e.g. As as As ion in water and As as AsH3 in water). In fact, methods are available that iodide is oxidized to I2 on purpose and molecular iodine (I2) is separated from solution by using a gas-liquid parator. Using ammonium hydroxide to wash between samples would help to clean the residual molecular iodine (i.e. to remove memory effect), but this would not eliminate the problem caused by the different sample introduction efficiency when iodide is prepared in low pH medium. One way to go is to adjust sample and standard to high pH. Metals are precipitated at high pH (a simultaneous analysis of iodine with other metals probably is not likely). Iodide or iodate will not be Precipitated. However, the co-precipitation of iodine (iodide and iodate) with other components needs to be confirmed. - PLASMACHEM - ----------------------------------------------------------- 요오드 분석시 시료와 표준용액을 0.1%(w/v) tetramethyl ammonium hydroxide(TMAH) base로 준비하시면 Spray Chamber에서 I2(iodine)형성을 막는것으로 알고 있습니다. 참고하시기바랍니다.
IP : 119.203.24.***

Common inorganic iodine exists as iodide (e.g. KI), iodate(e.g.KIO3), and iodine (molecular iodine, i.e. I2). In low pH (high acidity), iodide is easily oxidized to molecular iodine (I2) by dissolved oxygen. If iodide is prepared in diluted nitric acid, the oxidation is even more significant. The memory effect is seen from molecular iodine but not from iodide or iodate. The iodide and iodate would behave like other metals in terms of memory effect. In other words, if iodate is prepared either in low pH or high pH medium, no memory effect is seen. If iodide is prepared in low pH medium (pH 2 or 3, for example), memory effect is significant, but if iodide is prepared in high pH medium (pH > 8 - 9), no memory effect. Certainly, iodine (iodide, iodate, or molecular iodine) is quite different from other metals in terms of ionization potential.

In addition to the memory effect when iodide is prepared in low pH medium, the more severe problem is the different sample introduction
efficiency when iodide is introduced as a "regular" solution (as iodide ion in water) and when iodide is introduced as I2 (molecular
iodine in water).
This is something like a hydride generation (e.g. As as As ion in water and As as AsH3 in water). In fact, methods are available that iodide is oxidized to I2 on purpose and molecular iodine (I2) is separated from solution by using a gas-liquid parator.

Using ammonium hydroxide to wash between samples would help to clean
the residual molecular iodine (i.e. to remove memory effect), but this would not eliminate the problem caused by the different sample
introduction efficiency when iodide is prepared in low pH medium.

One way to go is to adjust sample and standard to high pH. Metals are
precipitated at high pH (a simultaneous analysis of iodine with other
metals probably is not likely).
Iodide or iodate will not be Precipitated. However, the co-precipitation of iodine (iodide and iodate) with other components needs to be confirmed.

- PLASMACHEM -
-----------------------------------------------------------

요오드 분석시 시료와 표준용액을 0.1%(w/v) tetramethyl ammonium hydroxide(TMAH) base로 준비하시면 Spray Chamber에서 I2(iodine)형성을 막는것으로 알고 있습니다.

참고하시기바랍니다.

IP : 119.203.24.***

%s1 / %s2

프린트 글쓰기 답글 돌아가기


번호	파일	제목	이름	작성일	조회수


652		바나륨	AnApex	2008.07.30	19,833
651		바나륨	dongabcd	2008.08.04	19,562
650		전처리 교육관련 질문입니다.	김동진	2008.07.28	17,931
649		전처리 교육관련 질문입니다.	AnApex	2008.07.28	18,572
648		실리콘 내 P 분석	곤이	2008.07.24	19,199
647		실리콘 내 P 분석	AnApex	2008.07.28	19,911
646		실리콘 내 P 분석	곤이	2008.07.30	19,799
645		실리콘 내 P 분석	오호동	2008.07.26	20,282
644		실리콘 내 P 분석	곤이	2008.07.28	19,096
643		실리콘 내 P 분석	오호동	2008.08.09	19,419
642		실리콘 내 P 분석	Anapex	2008.07.31	19,708
641		요오드 분석방법 문의	DPK	2008.07.23	19,217
		요오드 분석방법 문의	AnApex	2008.07.28	18,036
639		고맙습니다.	DPK	2008.07.30	17,282
638		검증된 내용들만	ㅋㅋㅋ	2008.04.01	15,510
637		안내장 부탁드립니다.	한국분석기술연구소	2008.01.18	15,705
636		자료실 파일을 볼수가 없네요.,.,	오기	2008.01.03	15,971
635		자료실 파일을 볼수가 없네요.,.,	KRIAT	2008.01.03	17,257
634		산화물로된powder중의 V2O4 와 V2O5 혼합 존재 에 관하여	오호동	2008.01.19	17,178
633		전처리 과정에서 생기는 불산의 휘발성..	이상원	2008.01.02	17,083

글쓰기